PUV-1350PLA-RX
Här har vi en HDBaseT mottagare i PUV-1300 serien, den är designad för att ta emot ljud och bild och bland annat USB över en enkel cat5e/6 kabel upp till 35 meter för 4K UHD, om man använder sig av cat6a/7 kablage samt begränsar upplösningen till 1080p så kan den klara av en längd upp till 60 meter.
Alla funktioner kan styras från frontpanelen men också över WebGUI:t, Telnet och RS-232.
The PUV-1350PLA-RX is a powered HDBaseT receiver with USB pathway and built in audio amplifier. The receiver forms part of the PUV-1350PL-Kit which also includes the PUV-1350PL-TXWP and the CR-TG2, together they offer a flexible AV and USB extension system reaching up to 35m when sending 4K timings (60m up to 1080p).
From within the receivers webGUI configurators can control additional functionality such as basic EDID management, HDCP management, Relays and basic signal event automation (which can automatically control external devices). All system functionality is controllable by the receiver via front panel controls, WebGUI, Telnet, and RS-232.
Additionally, the receiver features analogue audio de-embedding to a line output and a 20 watt, 4 Ohm, stereo amplified output.
The PUV-1350PLA-RX is also used with the PUV-1330PL-Kit.
Features:
- HDMI 2.0 and DVI 1.0 compatible
- HDCP 2.2 and HDCP 1.x compliant
- 1 x HDMI output plus analogue stereo audio output
- Built-in 20W per channel stereo amplifier
- HDBaseT extension supports resolutions up to 4K@60Hz (4:2:0, 8-bit) with automatic conversion of 4K@50/60Hz (4:4:4, 8-bit) or 4K@any (10/12-bit) sources to 4K@30Hz (4:4:4, 8-bit)
- HDBaseT extends video, audio, and data over a single Cat.5e/6/7 cable and can reach distances up to 35m/115ft at 4K when using Cat.6A/7 (up to 60m 1080p60 8bit 4:4:4)
- HDBaseT feature support: HD Video and Audio, control extension (IR, USB 2.0), and PoH
- Supports CEC bypass
- Supports pass-through of many audio formats including LPCM (up to 8 channels), Bitstream, and HD Bitstream
- Basic signal event automation (via RS-232, IR, CEC, and Relay)
- The receiver is controllable via front panel buttons with OSD, Control Keypad, WebGUI, Telnet, and RS-232
Specifications:
| Inputs | 1x RJ45 [1x HDBaseT HDMI & Propriety Data] 1x 3.5mm Stereo mini-jack [1x Infra Red Receiver] 1x RJ45 [1x IP Control] 1x Phoenix (4 pin) [1x RS-232 local control] 1x Phoenix (4 pin) [1x RS-232 HDBaseT pathway] |
| Outputs | 1x HDMI [1x HDMI Uncompressed AV and Data] 1x USB Type A [1x USB data Propriety Data] 1x 3.5mm Stereo mini-jack [1x Infra Red Emitter] 4x Phoenix (2 pin) [4x Contact Closure Relay Outputs] 2x Phoenix (2 pin) [1x Speaker Level Stereo Output] |
| POE PSU: | 24V/3.75A |
| Dimensions | 231mm [W] x 108mm [D] x 25mm [H] |
| Net Weight | 680g |
| Gross Weight | 2000g |
